This comprehensive pocket hole jig set from wolfcraft contains everything you need for pocket-hole joinery.
You can drill accurate boreholes into the workpiece with this jig set, join the two workpieces with screws to form a precise and stable connection, and plug the screw hole with the included beechwood covers so it becomes invisible. With the integrated ruler, you can measure the board's thickness.
This pocket hole jig set will be indispensable when doing pocket-hole joinery.
Corner connections
T connections
Edge-to-edge connections
Mitre connections
Measure the board's thickness with the integrated ruler
Pre-adjusted for all standard board thicknesses (with a minimum of 12 mm)
Delivery includes:
1 x Pocket hole jig
1 x Step drill, HSS, diameter 9.5 mm, length 180 mm
1 x Depth stop, diameter 9.5 mm
1 x Hexagonal key, SW 3
1 x Screwdriver blade, Pozidriv PZ 2, 150 mm
8 x Screw hole covers, dried beechwood
10 x Wood screws, 4 x 25 mm
10 x Wood screws, 4 x 30 mm
10 x Wood screws, 4 x 40 mm
10 x Wood screws, 4 x 60 mm
Delivered in a plastic carrying/storage case
For your safety It is essential that you observe the safety instructions issued by the manufacturer of your drive machines. These appliances must conform to VDE regulations. Appliances built after 1995 must have a CE certification. Always disconnect the power supply before changing appliances, changing work pieces, carrying out maintenance work and when not in use. Before commencing work, check that tools and appliances are working correctly. Never work with damaged or blunt tools. Before commencing work, check that the equipment is mounted correctly (e.g. screwed joints). Firmly clamp the work piece in position. Ensure that you and the appliances used always have a firm footing. When using tools and appliances, adhere to the Min./Max. rotational speed and the rotation directions stipulated on the products, packaging or in the instruction manual. Only use the tools for their intended purpose. Never remove existing fitted protective devices. Ensure that your clothes (especially sleeves) are close to your body and protect your hair. Protect your ears when carrying out work which produces a high level of noise. Wear safety goggles and mouth and nose protection when carrying out work which produces dust, shavings, fumes or sparks. Never reach into the equipment when it is in operation. Ensure that all electrical appliances are protected against damp, dust and humidity. Keep children away from your workshop and keep all equipment and tools in a safe place. Never allow inexperienced persons to work with your equipment and tools without instruction or supervision. Always plan your work carefully and be sure to maintain concentration. Keep your workplace neat and tidy. Only use original wolfcraft® spare parts. We reserve the right for technical modifications.
