Turn your bathroom into a wellness oasis with the premium overhead shower STRASBOURG from SCHÜTTE!
This showerhead is made of brass and has a long service life. The unique flat design of wellness head shower and the extra large size make for a great shower experience.
Additionally, the ball joint and connection are included making it easy to assemble.
Colour: Stainless steel
Material: Brass
Flat shower head dimensions: 20 x 20 x 6.6 cm (L x W x H)
With ½" (Ø approx. 1.9 cm) connection
With ball joint
Anti-limescale nozzles
Short water shut off time
Safety notes . Only allow experts carry out the installation work. . CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off. . Ensure that all gaskets have the correct fit. . These taps are not suitable for use on low pressure and small electrical storage heaters. . We recommend the installation of a filter into the appli- ance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the cartridge. . This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0 C, when there is danger of frost, sut off the water supply and empty the tap. . Take care when adjusting the warm water. Danger of scalding! . Incorrectly installed fittings can cause water damages! . Please ensure that no caustic or corrosive products such as detergents or household cleaning products make contact with the connection hoses; this can lead to water damages. . Despite careful production, sharp edges can occur. Please exercise caution!Your washbasin tap is delivered in a solid packaging, in or- der to protect it against transport damages. The packaging consists of recyclable materials. Dispose it in an environ- mentally suitable manner. Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal admini- stration about the possibility of an environmentally friendly disposal. Technical data . Flow pressure: Recommended as 1.5 to 6 bar; in case of more than 6 bar connection pressure, we recommend that a pressure reducer is installed . Water temperature: max. 80 ℃ Installation Instructions . Only hand-screw the connecting pipes, do not use pliers or a wrench! . After installing the tap please unscrew the mixer nozzle, flush the pipeline and the tap thoroughly for a longer time, in order to flush out contaminations and residues. . Do not twist or tension pipes! At first use check connec- tions for leaktightness! . Check all connections carefully after first-time use to make sure that they are tight. . We do not assume any warranty for incorrect installation - in particular for subsequent damages!
